| Build Volume (W*D*H) | 300*300*350mm³ |
|---|---|
| Max Printing Speed | 500mm/s |
| Max Acceleration | 15000mm/s² |
| Extruder | Planetary Double Gear, Reduction Ratio 1:7.5 |
| Hot End Temperature | ≤300℃ (572℉) |
| Heating Method | Ceramic Heating Plate |
| Nozzle | 0.4mm (Included), 0.6mm, 0.8mm |
| Hot Bed Temperature | 100℃ (212℉) |
| Build Plate | Double-sided Textured PEI Plate |
| Control System | Klipper (3308 Chip) |
| Storage | RAM: 512MB; Flash: 8GB (eMMC) |
| Slicing Software | Standard: Orcaslicer; Compatible with: Prusaslicer, Cura |
| Connectivity | Wi-Fi: 2.4 GHz (WPA2 only, WPA3 not supported) |
| Touch Screen | 4.3-inch Capacitive Screen |
| Supported Filament | PLA, PETG, TPU, PVA |
| Camera | Default: 640*480P, Max: 1080*720P |
| Printer Size | 510*575*710mm (Includes Screen and Filament Holder) |
| Power | 500W/24V @100-240 VAC, 50/60Hz |
| Filament Run Out Sensor | Yes |
| Power Loss Recovery | None |
| OTA | Yes |
© 2026 XpertMFG. All Right Reserved.
Designed & Developed by 
Innov Touch Technologies Pvt Ltd.